已完结小说排行榜,完美世界txt下载

ELECTRONIC HYGROSTAT

EFR 012

Applicable to: The electronic hygrostat senses the relative humidity in an enclosure with electric/electronic components and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure. The LED integrated in the adjustment knob is lit when the connected heater is in operation.

View product

ELECTRONIC HYGROTHERM

ETF 012

Applicable to: The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world. The LED integrated in the adjustment knob on the active controller is lit when the connected device is in operation.

View product

ELECTRONIC HYGROTHERM WITH EXTERNAL SENSOR

ETF 012

Applicable to: The electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world. The external sensor can be positioned freely anywhere in the enclosure for precise measurements.

View product

SWITCH MODULE

DCM 010 | DC 20 TO 56 V

Applicable to: The switch module is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ensured that the external contact is suitable to switch the required signal current without any problems.

View product

ELECTRONIC THERMOSTAT

DCT 010 | DC 20 TO 56 V

Applicable to: The electronic thermostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets. Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit. The external sensor can be positioned freely anywhere in the control cabinet for precise temperature measurements. Additionally, this thermostat is available in versions that not only measure temperature via the external sensor, but also the relative humidity.

View product

ELECTRONIC HYGROSTAT

DCF 010 | DC 20 TO 56 V

Applicable to: The electronic hygrostat with integrated switch module is used to control DC powered devices with high capacities in control and switch cabinets. Heaters, coolers, filter fans or signal devices can directly be controlled via an internal electronic circuit. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity. Additionally, this hygrostat is available in versions that not only measure the relative humidity via the external sensor, but also the temperature.

View product

PRODUCT

Product

< STEGO  

< JCA  

< SAN  

< Italcoppie  

< Emas  

< Tuerk-hillinger  

< South Korea KACON  

< New Product  

ELECTRONIC HYGROSTAT

ELECTRONIC HYGROTHERM

ELECTRONIC HYGROTHERM WITH EXTERNAL SENSOR

SWITCH MODULE

ELECTRONIC THERMOSTAT

ELECTRONIC HYGROSTAT